Keyboard Tester

Online keyboard test: every key, double typing and rollover

Test

Press every key on your keyboard. A key lights up when the computer receives it.

Detected: Full-size with numpad (100%) · … · ANSI
Click the keyboard below, then press keys. Keys are tested only while the keyboard is selected.
EscF1F2F3F4F5F6F7F8F9F10F11F12PrtScScrLkPause`1234567890-=BackspaceTabQWERTYUIOP[]\Caps LockASDFGHJKL;'EnterShiftZXCVBNM,./ShiftCtrlWinAltAltWinMenuCtrlInsHomePgUpDelEndPgDn↑←↓→Num/*-789+456123Enter0.
Keys tested0 / 00 left to press
At once0Hold several keys together
Typed twice0None so far
Auto-repeat–Hold one key for 2 seconds
  • Hold one key for 2 seconds to measure auto-repeat, one of the two usual causes of double letters.
  • Fn and some media keys are handled inside the keyboard or by the system, so no website sees them.
  • Hold several keys together to see how many register at once. Seven or more means N-key rollover.
  • To move on with the keyboard, press Tab three times quickly.

Terminal

Console ready. Execute a command to see output...

About Keyboard Tester

Keyboard tester: check every key online

This keyboard tester draws your keyboard and lights up each key when the computer receives the press. It works as a quick keyboard test before buying or selling a keyboard, and as a keyboard checker or key tester for keys not working on a desktop or laptop keyboard. Left and right Shift, Ctrl, Alt and Windows or Command keys light up separately, and the Terminal logs the presses with how long each was held, so the online keyboard test also works as a keyboard input test. For a controller, the Gamepad Tester does the same for every button and stick.

The drawing follows your keyboard. It starts from your system, a MacBook on a Mac, a Chromebook on ChromeOS and a full-size keyboard elsewhere, and labels the keys in your language layout. As soon as you press a key that only some keyboards have, it adds the numeric keypad or switches to ISO or JIS, which also answers whether a keyboard is ANSI or ISO. Ten forms can be picked by hand, from full-size to 60% and laptop layouts, each in ANSI, ISO or JIS where that variant exists.

Double typing, chatter and auto-repeat

When one press types a letter twice, there are two usual causes. A worn or dirty switch can bounce and send a second press a few milliseconds after the first. This is keyboard chatter, and the tester marks the key yellow with the gap in milliseconds. People rarely tap the same key faster than about a tenth of a second, so a second press under 50 ms comes from the switch. The other cause is auto-repeat: hold one key for two seconds and the page measures when repeating starts and how fast it runs, then compares that with how long your presses usually last. If repeating starts just after a normal press, a slightly longer press types the letter twice, and a longer repeat delay in the keyboard settings fixes it. A key that keeps repeating for three seconds gets its own line in the Terminal: if nobody is pressing it, the key is stuck.

Ghosting, N-key rollover and keys a browser cannot see

Hold several keys together to see how many arrive at once. Keyboards wire their keys in a grid, and with too many keys down some keyboards drop a key you pressed (blocking) or report one you did not (ghosting). The USB boot mode carries at most six ordinary keys plus the modifiers, so seven or more at once means the keyboard reports N-key rollover. If it stops at six, the cause can be the keyboard, a hub or KVM switch, or a compatibility setting, and a web page cannot tell which.

Fn never reaches a browser, because the keyboard or the system handles it. On a Mac, a Windows laptop or a Chromebook the top row usually runs brightness and sound, and the system keeps those presses, so the drawing shows that row locked until an F-key arrives with Fn or Search held. Browser shortcuts such as Ctrl+W can be tested in full screen in Chrome and Edge, which then hand them to the page.

How to use Keyboard Tester

  1. Press every key
    To test keyboard keys, click the drawing if needed and press each key once. Keys turn green as the computer receives them, and the counter shows how many are left.
  2. Match the drawing to your keyboard
    If the drawing does not match, pick the right form and ANSI, ISO or JIS above it. Keys already tested stay tested.
  3. Hold keys together
    Hold the keys you use at the same time, such as W, A, Shift and Space, and read At once. Seven or more means N-key rollover.
  4. Check double typing
    Tap a key that types twice to see whether it bounces, then hold any key for two seconds to measure auto-repeat.
  5. Finish and copy the report
    Press Finish test to print the report in the Terminal, then copy it with the copy button of the Terminal.

Frequently Asked Questions

Yes. The test runs in your browser and needs no install. Key presses are read inside the browser, and nothing you type is sent to a server or saved. Keys are caught only while the keyboard drawing has focus, so the rest of the page and other tabs work as usual.